DefinePK

Abstract

Low BSFC (Brake Specific Fuel Consumption) and flat-altitude-rating make piston engines ideal choice for altitudes up to 20,000m-65,000ft. These propulsion systems are more complex than traditional applications that are normally limited to 5,000-7,000m (16,000-23,000ft). In fact, the air propulsion (propeller or fan), the air intake, the fuel system, the turbo charging, the exhaust and the cooling system take part to the design optimization process. An integrated design is strictly necessary. At high altitudes, the intake air is taken from high-pressure areas into an alternate, extremely optimized, path. In propeller systems, a diffuser is usually positioned in the lower part of the aircraft. It converts kinetic energy into pressure. In fan systems, a little amount of “high pressure” air is taken from the high-pressure area of the fan. In lower power units, automotive-derived turbochargers can achieve the required pressure ratio. However, this option is limited by the maximum amount of volumetric flow rate. Moreover, automotive turbocharger housings have to be redesigned to use low-weight inconel alloys instead of heavier cast-iron. A complete redesign of the high pressure turbocharger (the unit closer to the engine manifold) can achieve pressure ratios from 8:1 to 10:1. This expensive process increases the power to mass ratio of the propulsion system. For higher power rating over about 200 kW axial compressor- turbine assemblies derived from small turbo shafts can be used as a turbo charging unit. In this case the burner is substituted by the piston engine. Especially for diesel engines, the advantage lies in the efficiency (BSFC). In fact, the maximum temperature reached in the diesel combustion chamber is about 4200K and the air flow is much lower than traditional turbo shafts. Hybrid and turbo compound solutions are also possible. The exhaust and the intake of the piston engine have to be redesigned. However, the requirements of low weight, high reliability and long endurance HALE (High Altitude Long Endurance) UAVs (Unmanned Aerial Vehicle) requires further work on this specific subject.